Part IX: PROduction Plan

PROduction PLAN

STEP	PROCEDURE/MATERIALS	TOOLS/EQUIPMENT	RISK	TIME
1	Draw your desired shapes on a piece of metal sheet.	pencil, ruler, nail, hammer, rope, eraser and tri square	Too many errors	one period
2	Cut from your metal sheet.	metal snips, gloves, drill, jigsaw	Hands may be mistaken in snipping	one period
3	Grind/Cut the pole.	metal grinder, goggles, gloves	The pole may be cut in the wrong way	one period
4	Weld the pole with the two bigger circles.	welding machine, gloves, mask/goggles	Nothing; we trust Sir Oro’s magical hands	one period
5	Attach the smallest circle to the pole.	Sealant	Sealant may be put to waste	one day
6	Put together the base.	rivet, riveter	Riveter may punch the wrong holes	one day
7	Attach the outer poles to the poles	rivet, riveter	Riveter may punch the wrong holes	one day
8	Attach the base to the pole.	rivet, riveter	Riveter may punch the wrong holes	one day
9	Cover the sharp edges.	electrical tape	May run out	One-half  period
10	Paint the artefact.	paint, face mask	Could ruin the whole project if not used correctly	One day